康 璟,李 涛,孙 伟,王 蒂,张俊莲,康天兰,张锋伟,吴建民.马铃薯挖掘机输送分离部件参数优化与试验分析[J].干旱地区农业研究,2013,31(6):257~262
马铃薯挖掘机输送分离部件参数优化与试验分析
Parameters optimization and test analysis of delivery separate parts in potato digger
  
DOI:10.7606/j.issn.1000-7601.2013.06.045
中文关键词:  马铃薯挖掘机  抖动轮  升运链  参数优化
英文关键词:potato digger  dithering wheel  lifting chain  parameters optimization
基金项目:国家科技支撑计划项目(2012BAD06B03);甘肃省科技支撑项目(1102MKDM025)
作者单位
康 璟1,李 涛1,孙 伟1,王 蒂1,张俊莲1,康天兰2,张锋伟1,吴建民1* (1.甘肃农业大学工学院 甘肃 兰州 730070 2.甘肃省经济作物技术推广总站 甘肃 兰州 730000) 
摘要点击次数: 1376
全文下载次数: 955
中文摘要:
      针对马铃薯挖掘机输送分离部件伤薯率高和土薯分离率低的问题,采用正交试验对抖动轮振幅、升运链线速度与升运链倾角进行探讨研究。在利用试验结果的基础上做出方差分析,得出影响输送分离部件工作性能的因素主次,进一步优化组合部件参数,设计出适应性强、工作可靠的马铃薯挖掘机。实验结果表明:抖动轮振幅为10 mm、升运链线速度为1.3 m·s-1、升运链倾角为21°时马铃薯挖掘机土壤分离效果良好,伤薯率≤4%。
英文摘要:
      Aim at the problem of high injury potato and lower soil potato separation rate by the delivery separate components in potato digger, has discussed and researched the dithering wheel's amplitude, lifting chain's linear velocity and lifting chain's dip angle by adopting the orthogonal experiment. On the basis of the test results, the variance analysis was processed, has obtained the main and second factors effected the working performances of delivery separate components, further optimized and associated the component's parameters, and designed out the high adaptable and reliable potato digger. The experimental result shown that: The soil and potato separation effect was well and injury potato rate was less than 4%, when the dithering wheel's amplitude was 10 mm, the lifting chain's linear velocity was 1.3 m·s-1 and the lifting chain's dip angle was 21°.
查看全文  查看/发表评论  下载PDF阅读器