李迪,孙伟,石林榕,张华,刘小龙,吴建民.跨越式膜上覆土装置的参数仿真设计与试验[J].干旱地区农业研究,2018,36(1):281~287
跨越式膜上覆土装置的参数仿真设计与试验
Parameter simulation design and experiment of crossing device of covering soil on film
  
DOI:10.7606/j.issn.1000-7601.2018.01.41
中文关键词:  膜上覆土装置  刮板升运链  离散单元法  响应曲面法
英文关键词:device of covering soil on film  scraper lifting chain  discrete element method  response surface methodology
基金项目:国家自然科学基金资助项目(51765004);公益性行业专项(201503124);甘肃省高等学校科研项目(2017D-13)
作者单位
李迪 甘肃农业大学机电工程学院 甘肃 兰州 730070 
孙伟 甘肃农业大学机电工程学院 甘肃 兰州 730070 
石林榕 甘肃农业大学机电工程学院 甘肃 兰州 730070 
张华 甘肃农业大学机电工程学院 甘肃 兰州 730070 
刘小龙 甘肃农业大学机电工程学院 甘肃 兰州 730070 
吴建民 甘肃农业大学机电工程学院 甘肃 兰州 730070 
摘要点击次数: 1323
全文下载次数: 839
中文摘要:
      针对全膜种植模式中覆土装置覆土质量差引起的易受风力破坏、烧苗、出苗受阻等问题,设计了一种适用于全膜覆土机具的跨越式刮板升运链膜上覆土装置。为提高覆土机构的工作性能,构建了覆土装置的实体模型,运用离散单元法模拟仿真试验,结合Box-Behnken试验设计原理,采用三因素三水平响应曲面法,借助Design-Expert软件处理试验结果,建立了覆土宽度和覆土厚度合格率的二次回归模型,分析各因素交互作用对试验指标的影响,优化得到最佳参数组合,即链速与机组前进速度比为1.38、排土口高度为200 mm、排土口宽度为120 mm,并依此进行田间验证试验。试验结果表明,用离散单元法模拟出的覆土宽度值和覆土厚度合格率接近田间重复试验均值,且满足农艺要求。
英文摘要:
      The mechanical device of covering soil on film with scraper lifting chain was designed to solve the problems including such as wind damage susceptible, burning seedlings, stemming emergence, which caused by the poor covering soil quality of device in whole plastic-film mulching planting pattern. In order to improve the working performance of covering soil mechanism, the entity model of this device was constructed. Using discrete element method to simulate experiment, combined with the experimental design principle of Box-Behnken, and applying response surface methodology with three factors and three levels, the quadratic regression models about width of covering soil and the qualified rate of covering soil thickness were built using Design-Expert software. Through analyzing the influence of factor's interaction on experimental aim, the best combination of parameters are proposed as follows: the ratio of chain speed and operating speed, 1.38; the height of dumping soil, 200 mm; and the width of dumping soil, 120 mm. Field experiment showed that the width of covering soil a nd the qualified rate of covering soil thickness simulated by discrete element method were close to the average value of repeated test, and it meet the agronomic requirement, thus providing theoretical basis for the design and improvement of the covering soil device.
查看全文  查看/发表评论  下载PDF阅读器